Mode / Function Overview; Audio Monitoring Connections; How To Select And Listen To The Demo Songs - Korg D16 Manual

Digital Recording Studio

Mode / Function Overview

Audio connections: Use the MASTER L / R outputs when connecting the D16 to a stereo
monitor system.
Recording sources and monitoring for this guide: You'll be recording with an external microphone for
some of the exercises in this guide. You'll need headphones and a lo-impedance microphone and cable.
Objects referred to in this guide:
Pan/Balance Knobs. D16 TouchView

How to Select and Listen to the Demo Songs:

1. Press the SONG key, then press the SelSong tab in the display.
2. Press the > button to the left of the current song name.
3. Press the button in the display, and press to highlight any demo song name.
4. Press the OK button in the display to select the highlighted song.
5. The TRACK STATUS LED's below the display should all be lit in green. Press any of the TRACK
STATUS keys that are not green to set Play Status.
6. Lower the MASTER fader to "00", press the PLAY key to begin playback, then slowly-raise the
MASTER fader to a comfortable listening level.
7. When the demo song has finished playing, press the STOP key.
Note: Make sure to press STOP when the song ends - if you don't, the counter will continue to run!
D16 Guide
D16 panel objects that you'll work with are: Keys, Dial, Faders and
objects that you'll work with are: Tabs, Buttons, Boxes and Icons.
3
KORG D16 Guide