Specifying The Function Of The Value Encoder; Key Lock Function - Korg Pandora PX5D Owner's Manual

Specifying the function of the Value encoder

You can specify the function that the Value encoder will
perform in Play mode. While in Play mode, hold down the
EXIT button and press either the √ CURSOR or the ®
CURSOR to assign the following functions.
● Hold down the EXIT button and press the √ CUR-
SOR. The LCD will indicate "MASTER" for approxi-
mately one second. The Value encoder will adjust the
master level, and the π/† CURSOR will select pro-
grams. You can use the Value encoder to quickly ad-
just the master level. Each time the power is turned
on, this setting will be in recalled.
Select
a program
● Hold down the EXIT button and press the ® CUR-
SOR. The LCD will indicate "PROGRAM" for ap-
proximately one second. The Value encoder will se-
lect programs, and the π/† CURSOR will adjust the
master level. You can use the Value encoder to quickly
select programs.
Adjust the
master level
18

Key Lock function

By activating the Key Lock function, you can disable all
operations except for selecting programs. This is a con-
venient way to prevent accidental operation during a live
performance.
● Hold down the EXIT button and press the TAP/BY-
PASS button. The LCD will indicate "KEYLOCK"
for approximately one second. The value encoder,
buttons, and knobs other than the π/† CURSOR,
PROGRAM MEMORY [A]–[D] buttons, and the foot
switches will not function.
Only program
selection is
Adjust the
possible
master level
The Key Lock function will be cancelled when the
power is turned off. You can also cancel the Key Lock
function by performing "Specifying the function of
the Value encoder."
Select a
program