Changing The Time Location; Switching The Counter Display; Moving The Current Time Location - Korg D1600mkII Owner's Manual

Changing the time location

This section explains how you can move the counter that
shows the current location within the song.

1. Switching the counter display

You can switch the time display type shown by the
counter.
1. Press the " " button located at the left of the
counter to access the "Select TimeDisp Type" dialog
box.
2. Select the type of time units that you wish to view,
press the "OK" button.
You can select one of the following four types of
display.
• ___.__.___ "measures" . "beats"
• ___:__.___ "minutes"
• ___:__.__F "minutes"
• ___.__ Free "minutes"
In order for the "__.__ Free" display to accurately
indicate the remaining time, you must set the
recording track [TRACK STATUS] to REC, and
set the counter display to "FreeTime." When you
do so, the remaining recording time will be
displayed according to the number of tracks that
are set to REC.

2. Moving the current time location

Using the counter
1. Select a page in which the counter is displayed in
the upper part of the LCD screen, such as the
[SONG/CD] "SelSong" tab page.
2. Select the portion in the counter that you wish to
change to a new location.
3. Rotate the [VALUE] dial to change the time.
46
. "1/96 of a beat"
: "seconds" . "1/1000 of a second"
: "seconds" . "1/30 of a second"
(remaining available
. "seconds"
recording time)
Using the [FF] or [REW] keys
Moving backward
Press the [REW] key to move toward the beginning
of the song. If you hold down the key, you will
rewind continuously.
You can also rewind during playback.
Moving forward
Press the [FF] key to move toward the end of the
song. If you hold down the key, you will fast-forward
continuously.
You can also fast-forward during playback.
Moving to the beginning of the song
While in the middle of the song, hold down the
[STOP] key and press the [REW] key to return to the
beginning of the song.
Moving to the end of the song
While in the middle of the song, hold down the
[STOP] key and press the [FF] key to jump to the end
of the song.
Using the locate keys to move
(LOC1, LOC2, LOC3, LOC4)
You can register specific times in the locate keys, and
jump instantly to those times.
Up to four locate points can be registered for each song.
Use the [IN/LOC1], [OUT/LOC2], [TO/LOC3], and
[END/LOC4] keys.
In addition to recalling the locate times that you reg-
ister, these keys are also used to specify the time loca-
tions for auto punch recording (IN/OUT times) and
for track editing (the editing region). For details on
the various locate functions, refer to p.118.
Registering a locate point
1. Move the current time to the location that you wish
to register.
Use the counter ("Counter") or the [FF]/[REW] keys
to change the current time.
2. Press the [STORE] key to capture the selected time
location.
3. Register the time location you captured.
Press one of the [IN/LOC1], [OUT/LOC2], [TO/
LOC3], or [END/LOC4] keys to register the saved
location in that key. The registration will be com-
pleted as soon as you press the key.
Even if you perform steps 2 and following dur-
ing playback or recording, the time location at
the moment you pressed the [STORE] key will be
preserved, and can be registered in a locate point.
Moving to a locate point
When you press a previously-registered [IN/LOC1],
[OUT/LOC2], [TO/LOC3], or [END/LOC4] key, you
will move to the registered location.