Changing The Drum Kits - Korg Pearl eMerge MDL1 Owner's Manual

Hide thumbs Also See for Pearl eMerge MDL1:

Table of Contents

Changing the drum kits

There are 35 preset drum kits on the Pearl e/MERGE separated into seven categories, and 50

user drum kits can be saved.

The preset drum kits cannot be overwritten. The user drum kits can be adjusted to match

your tastes and then saved.

Tip:

The user category drum kits contain the same drum kits as the preset category drum

kits when initially shipped from the factory.

1. Pressing a category button will let you select a drum kit within that category.

Pressing the same category button again will switch to the next drum kit in that category.

Pad name, striking force

Drum kit name

Tip:

The pad that you strike and the strength of your stroke is displayed on the top left

of the top page. Use this information to make sure that your connections are correct.

Tip:

If BPM synchronization can be done with the MFX, the SYNC FX icon will be dis-

played. (→ p.73 "MFX Type List")

Note:

Data will be loaded when the drum kit is changed. The " " icon will appear on

the display while data is being loaded. The pads may not make any sound if they

are struck while the " " icon is displayed.

2. Select a drum kit by turning the dial.

Turning the dial will let you select a drum kit within all categories.