Table of Contents
Advertisement
Parameter
Workwear
Hat
Face Mask
Apron
Gloves
Shoe Covers
Boots
Seatbelt
Safety Vest
Step 6
Configure alarm schedule and linkage.
1. Click
.
2. Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
On the time line, drag to set the period.
●
Description
Select Detection Mode.
Detect by attribute: You need to set the detection range.
●
Registration mode: You need to link the workwear
●
database that has been set for the front-end camera.
Receive an alarm event based on the linked workwear
database and display it.
1. Click Settings next to Linked Workwear Database.
2. Select workwear database1 , and then click OK.
Select Detect for Attributes , Detection Range, and Color.
Select Detect for Attributes.
Figure 5-202 Schedule and alarm linkage
322
User's Manual
Advertisement
Table of Contents
