Dahua NVR5208-EI User Manual page 306

5.9.10.2 Configuring ANPR
Configure the ANPR alarm rules.
Procedure
Select Main Menu > AI > Parameters > ANPR.
Step 1
Select a channel and then select the Enable checkbox to enable ANPR.
Step 2
(Optional) Enable Sync Vehicle Blocklist/Allowlist to synchronize the blocklist and
Step 3
allowlist on the NVR to the connected camera.
Click General (default), Blocklist or Allowlist tab.
Step 4
Before enabling the blocklist alarm or allowlist alarm, you need to add the corresponding
plate information.
General : The system triggers an alarm when it detects any plate number.
●
Block List : The system triggers an alarm when it detects plate number on the
●
blocklist.
Allow List : The system triggers an alarm when it detects plate number on the
●
allowlist.
Step 5 Click Setting next to Schedule to configure the arming period.
Figure 5-175 ANPR
290
User's Manual