Table of Contents
Advertisement
Step 2
Select a channel and then click
Step 3
Configure the detection region.
1. Click Setting next to Region.
2. Point to the middle top of the page.
3. Select one region, for example, click
4. Drag on the screen to select the region that you want to detect.
5. Configure the parameters.
Parameter
Description
Name
Enter a name for the region.
Every region of every channel has an individual sensitivity value.
Sensitivity
The bigger the value is, the easier to trigger an alarm.
Adjust the threshold for motion detection. Every region of every channel
Threshold
has an individual threshold.
Figure 5-212 PIR
to enable the function.
.
Table 5-57 Detection region parameters
332
User's Manual
Advertisement
Table of Contents
