Upnp - Dahua NVR5208-EI User Manual

Parameter
Type
Server Address
Domain Name
Username
Password
Interval
Step 3 Click Apply.
Enter the domain name in the browser on your computer, and then press the Enter key. If
the web page of the Device is displayed, the configuration is successful. If not, the
configuration failed.

5.11.11 UPnP

You can map the relationship between the LAN and the WAN to access the Device on the LAN
through the IP address on the WAN.
5.11.11.1 Configuring Router
Procedure
Step 1 Log in to the router to set the WAN port to enable the IP address to connect into the
WAN.
Step 2 Enable the UPnP function on the router.
Step 3 Connect the Device with the LAN port on the router to connect into the LAN.
Select Main Menu > NETWORK > TCP/IP, configure the IP address into the router IP
Step 4
address range, or enable the DHCP function to obtain an IP address automatically.
5.11.11.2 Configuring UPnP
Procedure
Select Main Menu > NETWORK > UPnP.
Step 1
Table 5-65 DDNS parameters
Description
Displays the type and address of DDNS service provider.
For Dyndns DDNS, the default address is members.dyndns.org.
●
For NO-IP DDNS, the default address is dynupdate.no-ip.com.
●
For CN99 DDNS, the default address is members.3322.org.
●
Enter the domain name that you have registered on the website of DDNS
service provider.
Enter the username and password obtained from DDNS service provider.
You need to register the username, password and other information on
the website of DDNS service provider.
Enter the interval at which you want to update the DDNS.
353
User's Manual