Dahua NVR5208-EI User Manual page 370

Step 2 Configure the settings for the UPnP parameters.
Parameter Description
Port Mapping Enable the UPnP function.
Indicates the status of UPnP function.
Status
Offline: Failed.
●
Online: Succeeded.
●
Enter IP address of router on the LAN.
LAN IP
After mapping succeeded, the system obtains IP address automatically.
Enter IP address of router on the WAN.
WAN IP
After mapping succeeded, the system obtains IP address automatically.
Figure 5-233 UPnP
Table 5-66 UPnP parameters
354
User's Manual