Table of Contents
Advertisement
The system triggers an alarm only when the size of detected target is between the
maximum size and the minimum size.
3. Configure the parameters.
Parameter
Description
Name
Customize the rule name.
Action
Set the intrusion action, including appear and crossing area.
Direction
Set the direction to cross the area, including enter, exit and both.
Click
Target Filter
Vehicle selected by default, the system automatically identifies the person
and motor vehicle appeared within the monitoring range.
4. Click OK.
Step 6
Configure alarm schedule and linkage.
1. Click
.
2. Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
On the time line, drag to set the period.
●
You can also click
●
3. Configure alarm linkage. For details, see Table 5-50 .
4. Click Apply.
Select Enable checkbox and then click Apply.
Step 7
Table 5-34 Intrusion parameters
and then select effective target. With Human and Motor
Figure 5-140 Schedule and alarm linkage
to set the period.
255
User's Manual
Advertisement
Table of Contents
