Table of Contents
Advertisement
Parameter
Enable Device Discovery
Private Protocol
Authentication Mode
LLDP
TLSv1.1
Click Apply.
Step 3
5.14.2.2 802.1x
The Device needs to pass 802.1x certification to enter the LAN.
Procedure
Select Main Menu > SECURITY > System Service > 802.1x.
Step 1
Description
After enabling this function, the NVR can be found by other devices
through searching.
Security Mode (Recommended): Uses Digest access
●
authentication when connecting to NVR.
Compatible Mode: Select this mode when the client does not
●
support Digest access authentication.
Enable the LLDP service.
The Link Layer Discovery Protocol (LLDP) allows two different devices
to collect hardware and protocol information about neighboring
devices, which is useful in troubleshooting the network.
Enable the TLSv1.1 encryption protocol.
397
User's Manual
Advertisement
Table of Contents
