Table of Contents
Advertisement
NVR52-8P-I/L/NVR42-EI/NVR42-P-EI/NVR42-8P-EI/
NVR42-16P-EI
Background Information
Different models have different numbers of HDDs.
Procedure
Step 1
Remove the four fixing screws on the rear panel.
Step 2
Remove the case cover along the direction shown in the following arrow.
Step 3
Match the four holes on the baseboard to place the HDD.
Figure 3-12 Remove screws
Figure 3-13 Remove cover
92
User's Manual
Advertisement
Table of Contents
