Table of Contents
Advertisement
The following figures are for reference only. Slight difference might be found on the actual page.
5.1 Initialization
Background Information
For first-time use, set a login password for the admin account (default user).
●
We recommend setting password protection so that you can reset password in case you forgot.
●
For your device safety, keep your login password well, and change the password regularly.
●
The IP address of the Device is 192.168.1.108 by default.
●
Procedure
Step 1
Start the NVR.
Step 2
Set region, time zone, and time according to the actual situation, and then click Next.
Click
Device directly after setting the time zone.
Step 3
Set the login password for the admin account, set the login password for the camera, and
then click Next.
You can click
The camera will share the same password with the Device in the case that you select the
checkbox next to Same as the Local Password.
5 Local Operations
to shut down the device. The system integrator or the user can shut down the
to enable the pattern password.
121
User's Manual
Advertisement
Table of Contents
