Dahua NVR5208-EI User Manual page 37

No. Name
1 Front panel lock
2 USB port
3 Network indicator light
4 Alarm indicator light
System HDD indicator
5
light
6 Power button
You can see there are 24 HDDs. From the left to the right and from the top to the bottom, it ranges
from 1-4, 5-8, 9-12, 13-16, 17-20, 21-24.
You can see there are two indicator lights on the HDD bracket.
Figure 2-32 Front panel
Table 2-16 Icons
Function
—
—
The blue network indicator light is on after you
connected the device to the network.
The alarm indicator light becomes on once an alarm
occurred. It becomes on via the software detection.
The indicator light becomes on when there is a local
alarm.
The blue light becomes on after system booted up
properly.
In the system HDD, there are device important
configuration file, factory default configuration file,
and device initial boot up data.
Press it once to turn on the device.
Press it for a long time to turn off the device.
We do not recommend you turn off the device in
●
this way.
Press power button for a long time or pull out the
●
power cable might result in device auto restart.
21
User's Manual