Table of Contents
Advertisement
1. Click
2. Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
●
3. Configure alarm linkage. For details, see Table 5-50 .
4. Click Apply.
Select Enable checkbox and then click Apply.
Step 7
5.9.7.2.5 Parking
When the detection target stays in the monitoring area longer than the set duration, the system
performs alarm linkage action.
Procedure
Select Main Menu > AI > Parameters > IVS.
Step 1
Figure 5-146 Schedule and alarm linkage
.
On the time line, drag to set the period.
You can also click
to set the period.
261
User's Manual
Advertisement
Table of Contents
