Table of Contents
Advertisement
On the top right of the live view screen, use the left mouse button or press Shift to
●
switch between
allowed) to turn on/off the tour function.
On the navigation bar, click
●
Step 2
Configure the tour setting parameters.
Parameter
Description
Enable Tour
Enable tour function.
Enter the amount of time that you want each channel group displays on
Interval
the screen. The value ranges from 5 seconds to 120 seconds, and the
default value is 5 seconds.
Select the View 1 or View 8 for Motion Tour and Alarm Tour (system
Motion Tour, Alarm
Tour
alarm events).
In the Live Layout list, select View 1, View 4, View 8, or other modes that
Live Layout
are supported by the Device.
Figure 5-298 Tour
(image switching is allowed) and
to enable the tour and click
Table 5-87 Tour parameters
417
User's Manual
(image switching is not
to disable it.
Advertisement
Table of Contents
