Dahua NVR5208-EI User Manual page 196

For cameras accessed through private protocol, you can click LIVE and then enter the
●
username and password to play live video.
To filter the remote devices, you can enter all or part of device name in the Filter box.
●
To filter out the uninitialized devices, click the Not Initialized tab, and then you can
●
initialize the devices. For details, see "5.7.1 Initializing Remote Devices".
To view all remote devices added through plug and play, you can click the Not Auto
●
Connected tab. You can remove devices added through plug and play, and they can
be automatically added again after plug and play is enabled.
(Optional) Enable Plug and Play.
Step 3
When Plug and Play is enabled, the NVR automatically adds remote devices on the same
subnet.
For uninitialized remote devices, the NVR automatically initializes them before adding
●
them.
You can click
●
validity period as 1 hour, the plug and play will be automatically turned off after 1
hour.
(Optional) Enable H.265 Auto Switch.
Step 4
When H.265 Auto Switch is enabled, the video compression standard of added remote
devices is switched to H.265 automatically.
Double-click a remote device, or select a remote device and then click Add to register it
Step 5
to the Added Device list.
Related Operations
Change camera login password.
●
Select an added camera, and then click Change Camera Login Password to change the
password.
Show camera login password.
●
Select an added camera, and then click Show Camera Password to show the password.
Edit camera information.
●
On the Added Device list, click
information.
set the plug and play validity period. For example, when you set the
Figure 5-66 Validity period
to change the IP address, username, password and other
180
User's Manual