Table of Contents
Advertisement
You can configure IP address, subnet mask, default gateway, DHCP server of the Device.
Procedure
Select Main Menu > NETWORK > Wi-Fi AP > Advanced.
Step 1
Step 2
Configure parameters.
Parameter
IP Address
Subnet Mask
Default Gateway
Start IP
End IP
Preferred DNS
Alternate DNS
Click Apply.
Step 3
Figure 5-223 Advanced settings
Table 5-62 Parameters of advanced settings
Description
Set IP address, subnet mask and default gateway for the Wi-Fi of NVR.
IP address and default gateway must be on the same network segment.
Set the start IP address and end IP address of the DHCP server.
Set preferred and alternate DNS server address.
345
User's Manual
Advertisement
Table of Contents
