Dahua NVR5208-EI User Manual page 35

No. Name
3 Alarm indicator light
4 Network indicator light
5 USB port
6 Front panel lock
For general NVR616-4KS2/NVR616-XI/NVR50-EI series, the front panel is shown as below.
No. Name
1 Power button
System HDD
2
Indicator light
3 Alarm indicator light
Network indicator
4
light
Function
The alarm indicator light becomes on once an alarm
occurred. It becomes on via the software detection.
The indicator light becomes on when there is a local
alarm.
The blue network indicator light is on after you
connected the device to the network.
—
—
Figure 2-30 Front panel
Table 2-15 Icons
Function
Press it once to turn on the device.
Press it for a long time to turn off the device.
We do not recommend you turn off the device in this
●
way.
Press power button for a long time or pull out the
●
power cable might result in device auto restart.
The blue light becomes on after system booted up
properly.
In the system HDD, there are device important
configuration file, factory default configuration file, device
initial boot up data.
The alarm indicator light becomes on once an alarm
occurred. It becomes on via the software detection. The
indicator light becomes on when there is a local alarm.
The blue network indicator light is on after you connected
the device to the network.
19
User's Manual