Parameter
Disconnect
Connect
Click Apply.
Step 3
After the connection is successful, a Wi-Fi connection signal flag appears in the upper-
●
right corner of the live view page.
The Wi-Fi module models currently supported are D-LINK, dongle and EW-7811UTC
●
wireless cards.
5.11.5 Wi-Fi AP
Background Information
You can configure Wi-Fi parameters for the NVR to ensure that a wireless IPC can connect to the
NVR through Wi-Fi AP.
This function requires the built-in Wi-Fi module in the Device.
5.11.5.1 General Settings
Background Information
You can configure SSID, encryption type, password and channel of the device.
This function is supported on select wireless models.
●
When the wireless IPC and NVR are matched, the pairing will be completed in 120 seconds after
●
they are powered on.
Procedure
Step 1
Select Main Menu > NETWORK > Wi-Fi AP > General.
Description
Disconnect the current connection.
Select an available site and then click Connect.
343
User's Manual