AI by Recorder is available on select models.
Step 3
Click Add to add a rule.
Select Enable and then set Type to People Detection, Non-motor Vehicle Detection or
Step 4
Motor Vehicle Detection.
Step 5
Draw detection rule.
1. Click
, and then draw a detection area on the video image. Right-click the image to
stop drawing.
2. Enter the rule name.
3. Click
to draw the minimum size or maximum size to filter the target.
The system triggers an alarm only when the size of detected target is between the
maximum size and the minimum size.
4. Click
5. Select A to B , B to A, or Both as direction for tripwire counting.
Tripwire counting is available when AI by Camera is used and the camera supports this
function.
6. Click OK.
Click Apply.
Step 6
Figure 5-167 People detection
to enable face detection.
282
User's Manual