3. Mechanical Installation
This section provides instructions for a proper installation and connection of 2N
The device can be installed in one of the following ways:
•
onto a wall using a KU68 mounting box (not included in the package),
•
onto a wall using a metal holder,
•
into a stand.
Warning
Having unpacked 2N
hands at the same time to remove it safely. A careless removal and insufficient push
might lead to a locking latch damage. Hence, follow the mentioned metal holder
instructions below closely!
•
3.1 Installation Conditions
•
3.2 On-Wall Installation
•
3.3 Stand Installation
•
3.4 Device Removal
•
3.5 Power Supply
®
Clip, remove the metal holder for installation. Use both your
1.
Push the locking latch in the center of the device
bottom edge with your left hand in such a manner that
it bends sufficiently for the metal holder removal. Do
not push the locking latch from the top. You might get
injured while removing the metal holder.
2.
Grasp the metal holder with your right hand and slide it
downwards for removal.
2N® Clip User Manual
®
Clip.
9 / 75
Need help?
Do you have a question about the Clip and is the answer not in the manual?