Mechanical Installation - 2N IP Verso Installation Manual

2.2 Mechanical Installation

Mounting Types Overview
Refer to the table below for a list of mounting types and necessary components. You can
assemble multiple units in all mounting types.
Flush mounting – classic bricks
• incl. hollow bricks, thermally insulated walls, etc.
What you need for mounting:
• a properly cut hole as instructed in the box package
• Plaster, mounting glue, mounting foam or mortar as necessary
®
• 2N IP Verso, flush mounting boxes and frames
• 1 module: box Part No. 9155014, frame Part No. 9155011
• 2 modules: box Part No. 9155015, frame Part No. 9155012
• 3 modules: box Part No. 9155016, frame Part No. 9155013
Flush mounting – plasterboard
What you need for mounting:
• a properly cut hole as instructed in the box package
®
• 2N IP Verso, flush mounting boxes and frames
• 1 module: box Part No. 9155014, frame Part No. 9155011
• 2 modules: box Part No. 9155015, frame Part No. 9155012
• 3 modules: box Part No. 9155016, frame Part No. 9155013
Installation manual 2N® IP Verso
62 / 241