2N Clip User Manual page 27

5.1.2 IP Address Retrieval
Follow the instructions below to retrieve the current IP address:
1. Press and hold the RESET button.
2. Wait until the red and green LEDs go on simultaneously on the device and the acoustic
signal can be heard
3. Release the RESET button.
4. The device announces the current IP address via the speaker automatically.

Note
The delay between the RESET press and the first light and sound signaling is set to 15–35
s depending on the device model used.
5.1.3 Static IP Address Setting
Follow the instructions below to switch on the Static IP address mode (DHCP OFF):
1. Press and hold the RESET button.
2. Wait until the red and green LEDs go on simultaneously on the device and the acoustic
signal can be heard
3. Wait until the red LED goes off and the acoustic signal can be heard
another 3 s).
4. Release the RESET button.
(approx. 15–35 s).
(approx. 15–35 s).
2N® Clip User Manual
(approx. for
27 / 75