2N Clip User Manual page 29

5.1.5 Factory Default Reset
Follow the instructions below to reset the 2N
1. Press and hold the RESET button.
2. Wait until the red and green LEDs go on simultaneously on the device and the acoustic
signal can be heard
3. Wait until the red LED goes off and the acoustic signal can be heard
another 3 s).
4. Wait until the green LED goes off and the red LED goes on again and the acoustic signal
can be heard
5. Wait until the red LED goes off and the acoustic signal can be heard
another 3 s).
6. Release the RESET button.
®
Clip factory default values:
(approx. 15–35 s).
(approx. for another 3 s).
2N® Clip User Manual
(approx. for
(approx. for
29 / 75