2N Clip User Manual page 41

5.2.6.4 Web Server
®
2N Clip can be configured using a common browser that approaches the web server integrated
in the device. The HTTPS protocol is used for the browser - device communication.
Basic Settings
Device Name – set the device name to be displayed in the right-hand upper corner of the web
interface, in the login window and in other applications if necessary (2N
etc.).
Web Interface Language – set the default language for the administration web server login. Use
the upper toolbar buttons to change the web interface language temporarily any time.
Password – set the device access password. Click the pencil icon
password. Make sure that the password contains 8 characters at least, including one small
alphabet letter, one capital alphabet letter and one digit.
Advanced Settings
HTTP port – set the web server port for HTTP communication. The port change will not be
applied until the device is restarted.
HTTPS port – set the web server communication port via the secured HTTPS. The port change
will not be applied until the device is restarted.
Lowest Allowed TLS Version – define the lowest TLS version allowed for connection to the
device.
HTTPS Server Certificate – set the server certificate and private key used for encrypting the
communication between the device HTTPS server and user web browser.
Allow Remote Access – enable remote access to the device web server from off-LAN IP
addresses.
User Localization
Original Language – download an original XML file from the device, which contains all the web
user interface texts in English.
User Language – upload, download and remove, if necessary, the user file including custom
translations of the web user interface texts.
5.2.7 Hardware
The Hardware section provides the device hardware settings and includes the following menus:
• 5.2.7.1 Audio
• 5.2.7.2 Display
• 5.2.7.3 Digital Inputs
2N® Clip User Manual
®
Network Scanner,
to change the
41 / 75