Mitsubishi Electric 700 Series Training Manual page 122

3. Setup Screen
Operation method (Copying/pasting the tool life data) (M system)
(1) Move the cursor to the line to be copied.
(2) Press the menu Line copy .
(3) Move the cursor to the line where the data
is to be pasted.
(4) Press the
Line paste
(Note 1) Once copied, the data is held until a new data item is copied.
(Note 2) It is not possible to paste into a line for which a tool No. has not been set.
Operation method (Erasing one line of tool life management data) (M system)
(1) Move the cursor to the line to be erased.
(2) Press the menu Line clear
INPUT keys.
(3) Press the
Y or
Press a key other than
in order not to erase the data.
menu.
and
INPUT key.
Y or INPUT
3.5 Tool Life Management
The menu is highlighted.
The background color of the copied data changes to light
blue.
(The color changes even when scrolling horizontally.)
The copied tool life management data is written to the data
(excluding the tool No.) in the line where the cursor is
located.
The background color returns to normal.
The cursor moves to " ST " .
The menu is highlighted.
A message displays confirming whether it is okay to erase
the data.
The background color of the area to be erased changes to
light blue.
One line of the selected life management data is erased and
the menu highlight returns to normal.
The next line moves up after erasing.
114