Erasing A File; Changing A File Name (Rename) - Mitsubishi Electric 700 Series Training Manual

6. Maintenance Screens

6.2.5 Erasing a File

Erasing a file Erase A
(1) Press the menu
select file setting column A.
(2) Designate the device, directory and file
name to be erased.
(3) Press the menu Erase A .
(4) Press Y or
(Note) If the file to be erased is running or in "program restarting" mode, the operation message
"Executing automatic operation" or "Program restarting" is displayed, and the file will not be
erased.
Erasing a file Erase B
The operations are the same as method "Erasing a file Erase A " above. Designate the target device,
directory and file name in the file setting column B, and press the menu Erase B .

6.2.6 Changing a File Name (Rename)

Operation method
(1) Press the menu
select file setting column A.
(2) Designate the original device, directory
and file name.
(3) Press the menu
select file setting column B.
(4) Designate the new device, directory and
file name.
(5) Press the menu Rename A -> B .
(6) Press Y or
(Note 1) Select the same device for original and new devices.
(Note 2) If the file to be renamed is running or in "program restarting" mode, the operation message
"Executing automatic operation" or "Program restarting" is displayed, and the name will not be
changed.
(Note 3) If a file that does not exist is designated for the original file, or if an existing file name is
designated for the new file selection, an error occurs, and the name is not changed.
Area change , and
INPUT .
Area change , and
Area change , and
INPUT .
The designated file appears.
A message to confirm the erasing appears.
The designated file name appears.
The designated new file name appears.
252
6.2 Input/Output Screen