Checking One Block At A Time; Canceling The Program Check - Mitsubishi Electric 700 Series Training Manual

4. Edit Screens
(6) Press the Check continu key.
A block stoppage occurs when performing
a program check if the Check continu
or Check step keys are pressed while
performing a continuous check.
Furthermore, the program check is
restarted if the
pressed during the block stoppage.
The program check is reset if the
Check reset
performing a continuous check.

4.4.2 Checking One Block at a Time

Operation method
(1) Press the main menu Check .
Press the menu 3D check
the program check (2D) appears.
(2) A check search is performed using the
same method as for " 4.4.1 Checking
Continuously " .
(3) Press the menu Check step .
(4) Press the menu Check step .
The program check is continued from the
next block if the Check continu key is
pressed during block stoppage.

4.4.3 Canceling the Program Check

Operation method
(1) Press the menu Check reset .
Check continu key is
key is pressed while
key when
A program check is performed, and a solid drawing is made
for the cutting process workpiece shape and tool movement.
A " Checking " message appears and the
Check continu menu is highlighted.
The check counter display is updated.
The check G modal does not appear.
The machining time is updated.
A " Program check completed " message appears when the
continuous check is completed.
The Check continu menu highlight returns to normal.
The program check screen becomes active.
The program check is executed for one block, and a solid
drawing of the workpiece shape and tool movement during
the cutting process is made.
The check counter display is updated.
The check G modal display is updated.
The machining time is updated.
The program check is executed for the next block.
The program check is reset and a " Reset complete "
message appears.
179
4.4 Program Check (3D)