Program Input/Output - Mitsubishi Electric 700 Series Training Manual

4. Edit Screens

4.5 Program Input/Output

The machining program can input/output between the NC internal memory and the external input/output
device. The hard disk inside the NC unit is also treated as an external device.
This function applies to the following devices.
(1) Memory (NC internal memory)
(2) HD
(3) Serial
(4) Memory card (front IC card)
(5) DS (compact flash at NC)
(6) Ethernet
(7) FLD
<During file transmission>
(1)
(2)
<During file setting>
4.5 Program Input/Output
190
(4)
(3)
(5)
(6)
(7)