Checking Continuously - Mitsubishi Electric 700 Series Training Manual

4. Edit Screens

4.4.1 Checking Continuously

Operation method
(1)
Press the main menu
Press the menu 3D Check
the program check (2D) appears.
(2) Press the Operate search
Memory
(3) Select a device.
(Ex.) Menu Memory
(4) Use the ↑ ,
align the cursor with the target machining
program.
The name of the machining program to be
edited can be input in the input area.
(Note) When the number of characters of directory path (full path) exceeds 48, changing directories
cannot be performed.
(5) Press the INPUT key.
When setting data exists in the input area,
a search is performed in this data. This
procedure is also used when performing
an NB search.
(Ex.)
1001/1/2
1001.PRG/1/2
/1/2 (current O number) N1 B2
1001//2
1001/1
1001
/1 (current O number) N1 B0
//2 (current O number) N0 B2
.
Check
key when
key.
HD Memory
card
↓ ,
, keys to
O1001 N1 B2
O1001 N1 B2
O1001 N0 B2
O1001 N1 B0
O1001 N0 B0
The program check screen becomes active.
The following menu appears.
The list appears in a pop-up window.
DS FLD List
update
The selected device name and directory (memory:
/program) appear in the device name and directory display
columns.
The check search is started.
A " Search completed " message appears when the search is
completed.
After performing the search, the function and program
position appear in the current machining program display
column.
The list is then closed.
The system distinguishes between the presence or lack of
an extension, and therefore due care should be taken.
178
4.4 Program Check (3D)
Sort Close
change