Setting The Analog Levels; Audio Channels 1 And 2 Processing And Audio Channels3/4 Processing (-A8 Version Only) - evertz 7700 Manual

7700 MultiFrame Manual
7736CD2 Dual Composite Decoder

8.5.5. Setting the Analog Levels

There are 2 menu items to adjust the levels of each of the analog audio inputs. For simplicity only the
menu for channel 1 will be shown in the manual.
Audio
Ch1 adjust
-20 to 20
0

8.5.6. Audio Channels 1 and 2 Processing and Audio Channels3/4 Processing (-A8 version only)

Audio
Ch1/ch2
processing
Pass
Swap
Audio
Ch3/ch4
processing
Pass
Swap
Page - 22
The channel input level is adjusted with this control. It has a range of
approximately +/- 10 dB with 1/2dB resolution.
For more details about setting the input level jumpers, see section 7.1
Basic audio channel manipulation is possible with this control.
Pass, routes both input channels straight through, while Swap, routes the
two channels to the opposite channel output of the pair.
Basic audio channel manipulation is possible with this control.
Pass, routes both input channels straight through, while Swap, routes the
two channels to the opposite channel output of the pair.
Revision 1.0.4