Anti-Interference Requirements; Tools - Ruijie RG-MAP852-SF-M Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
Ammonia gas (NH3)
Chlorine gas (CI2)
Note
Average refers to the average value of harmful gases measured in one week. Maximum
refers to the upper limit of harmful gases measured in one week, and the maximum
value cannot last for more than 30 minutes every day.
2.2.6

Anti-interference Requirements

Take interference prevention measures for the power supply system.

Keep the AP away from the grounding equipment or lightning and grounding

equipment of the power device as much as possible.
Keep the device far away from high-frequency current devices such as high-power

radio transmitting station and radar launcher.
Take electromagnetic shielding measures when necessary.

2.3

Tools

Table 2-3 Tools
Common
Tools
Special Tools
Meter
Relevant
Devices
0.05
0.01
Phillips screwdriver, wires, Ethernet cables, fastening bolts, diagonal pliers,
and binding straps
Anti-static gloves, wire stripper, crimping pliers, RJ45 crimping pliers, and
wire cutter
Multimeter and bit error rate tester (BERT)
Fiber splicing equipment
18
Preparing for Installation
0.15
0.3