Anti-Interference Requirements; Tools - Ruijie RG-MAP852V3 Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
Nitrogen dioxide (NO
Ammonia gas (NH
Chlorine gas (CI
Note
Average refers to the average value of harmful gases measured in one week. Maximum
refers to the upper limit of harmful gases measured in one week, and the maximum
value cannot last for more than 30 minutes every day.
2.2.6

Anti-interference Requirements

Take interference prevention measures for the power supply system.

Keep the AP away from the grounding equipment or lightning and grounding

equipment of the power device as much as possible.
Keep the AP far away from high-frequency current devices such as high-power radio

transmitting stations and radar launchers.
Take electromagnetic shielding measures when necessary.

2.3

Tools

Table 2-3 Tools
Common
Tools
Special
Tools
Meter
Note
The RG-MAP852(V3) is not shipped with a tool kit. The tool kit is customer-supplied.
) 0.04
2
) 0.05
3
) 0.01
2
Phillips screwdriver, cables, cage nuts, diagonal pliers, and flathead
screwdriver (for removing the decorative cover)
Wire stripper, crimping pliers, wire cutter, and ESD tools
Multimeter and bit error rate tester (BERT)
15
Preparing for Installation
0.15
0.15
0.3