Mitel MiVoice Office 400 User Manual page 8

Hide thumbs Also See for MiVoice Office 400:
Table of Contents

Advertisement

C
1
HAPTER
Metal objects
Telephone receivers produce magnetic fields that
can attract small metallic objects such as pins and
staples. To avoid injury, do not place the handset
where such objects can be picked up.
Maintenance
Make sure all installation and repair work is
carried out by a specially qualified techni-
cian.
Always use a soft, moistened, or anti static
cloth to clean your device. Do not use chem-
icals or other chemical products.
Touch screen
Please observe the following rules when you are
cleaning the screen:
Do not touch the screen with sharp or
abrading objects (e.g. a pen or a
screw-driver).
Always use a soft, moistened, or anti static
cloth to clean the screen. Do not use chem-
icals or other chemical products.
Avoid spilling fluid over the surface or
seeping of fluid under the edges of the
touch screen.
Cost control and data protection
You should protect your phone with a PIN so that
no-one can make phone calls at your expense. A
code will also protect your personal settings.
Ambient conditions
Only operate the device in a temperature
range of +5 °C to approx. +40 °C.
Avoid direct sunlight and other sources of
heat.
Protect your device against the moisture,
excessive dust, corrosive liquids and steam.
Do not expose your device to electromag-
netic fields (for example: electric motors,
household appliances). The speech quality
could be affected.
S
AFETY INFORMATION
W
...
ELCOME
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

6940

Table of Contents