Mitel MiVoice Office 400 User Manual page 65

C 4
HAPTER
Ring Alone on/off
Run XML function
Set up conference
Show alarm state
Silent intrusion
Substitution
Switch group x, position 2
Switch group x, position 3
System events
System menu
Take (pick up own call)
Transparent data
User group all: Log in/log out
This function lets you specify which of your
phones signals incoming calls acoustically (as part
of the one-number user concept, see chapter
"Activating Ring Alone").
You system administrator creates
customer-specific XML services (weather report,
stock exchange, etc.) which you can use on your
SIP phone.Redkey:Trigger
Set up a conference with two call parties.
Display of the current alarm state. Contact your
system administrator to configure this function
on your phone.
This function intrusion without prior notice
allows you to intrude on the call of a busy user
without notification (see chapter
"Activating/answering silent
This function lets you to forward calls intended
for the operator phone to a destination number.
This function lets you route calls and functions
via switch groups (with two switch positions).
Displays list of system events on your phone. For
more information about how to access the
system events on your phone, see the section
"Operating system events".
Access to the MiVoice Office 400 system menu.
Transfer a call from your phone to another phone
under the one number user concept (see chapter
"Take (pick up own call)").
This function takes charge of the transparent
exchange of data between the communication
server and external applications.
Log in/out of all user groups. In the user group
incoming and internal calls are routed to a group
of internal destinations according to a
preconfigured call distribution.
O
VERVIEW OF AVAILABLE FUNCTIONS
intrusion").
P
HONING
59