Mitel MiVoice Office 400 User Manual page 61

C 4
HAPTER
Call list: Menu
Call list: Answered
Call list: Redial
Call list: Unanswered
Call recording: Start/stop
Call transfer
Control output on/off
Discreet ring on/off
Do not disturb (busy) on/off
Do not disturb (forwarding) on/off
Empty
Free configurable
Direct access to the system menu Call list.
Call list for answered calls.
Call list for dialed call numbers.
Call list for unanswered calls.
Record a call. The recordings are stored in your
individual e-mail inbox only (see chapter
"Recording a call"). Contact your system
administrator to configure this function on your
phone.
Transfer a call to another user with or without
prior notice.
You can control external electric equipment or
installations using control outputs. For example
you can use your phone to open and close
electric gates or to switch the lights on or off
throughout a building.
When this function is on, the phone only rings
once. For further information, please see
"Activating discreet
Your phone does not ring and is set to busy for
incoming calls.
Your phone does not ring and is set to busy for
incoming calls. Incoming calls are automatically
forwarded to a destination that has been
configured by your system administrator.
The key assignment is configured with an empty
function. The key serves as a place-holder. If
configuration on any key is deleted, the
configurations on the subsequent keys shift their
position. This can be avoided if instead of
deleting the configuration, you configure the
Empty function on that key.
You can use function commands to define a
function to suit your personal requirements. A
function can consist of one or more function
commands, function codes, and the phone
number. You can either carry out a function
directly or store it under a key (see chapter
"Overview of available
O
VERVIEW OF AVAILABLE FUNCTIONS
ring".
functions").
P
HONING
55