Table of Contents
Advertisement
O P E R A T I O N
M A N U A L
Unpacking and setting up
PLEASE NOTE:
The preamplifier
(if existent) are very heavy. To avoid injuries while unpacking it is
suggested that only personnel with experiences in heavy weights
unpack the units. The preamp
cover. Make sure that children do not play with it to avoid the danger of
suffocation.
UNPACKING
To avoid damaging the housing, please do not use pointed or sharp tools to open
the box. Please make sure that the content of the box is complete. If something is
missing or you notice any damage while unpacking, do not hook up the unit.
Instead, contact your authorized dealer.
CONTENT OF BOXES
The two boxes should contain the following:
•
1
box with the preamp
077
•
1
Base plate with
4
carbon fiber damping discs for the preamp
AC BURMESTER power cord
•
1
•
4
Input adapter plugs XLR – RCA
•
1
remote control
005
•
1
owner's manual
box with the power supply unit (only with external power supply)
•
1
•
Base plate with
carbon fiber damping discs for the power supply unit
1
4
(only with external power supply)
•
1
multi-pin power cord for connecting the power supply unit to the preamp
(only with external power supply)
PACK AGING
We recommend to keep the original packing in case the unit needs to be shipped in
the future.
8 | 7 6
and the external power supply unit
077
is shipped inside a plastic protective
077
.
mm²
2
5
SETTING UP
Too low or too high temperatures may cause damage inside of the preamp.
Therefore we recommend you leave the unit to adapt to room temperature,
before using it for the first time.
Carefully remove the unit from its packaging and set it up in an appropriate location.
To protect the preamp
from overheating make sure that the location offers
077
sufficient air circulation around the unit. Also, avoid excessive exposure to sun,
dust and humidity.
Please make sure that your desired location for the preamp is stable enough to
carry its weight.
Ventilation ducts and openings in the housing serve to keep the unit cool.
They must not be covered up with magazines, tablecloth, curtains etc.
If the preamp has to be operated in an extremely warm environment it may be
necessary to supply additional ventilation. Avoid operating the unit in an
excessively humid environment like bathrooms etc.
SET UP VARIATIONS
The feet of the preamp and of the power supply unit are constructed as spikes.
They can either be placed directly on the aluminum of the base plate or on the
supplied carbon fiber damping discs. Using the Kevlar fiber damping discs
additionally decouples the entire housing acoustically from the ground surface.
FOOT
FOOT
BASE
KEVLAR DAMPER
0 7 7
P R E A M P L I F I E R
BASE
9 | 7 6
Advertisement
Table of Contents
