Unpacking And Setting Up - Burmester Top Line Phono preamp 100 Owner's Manual

CAUTION: The Phono preamp 100 is shipped inside a plastic protective cover. Make sure that children do
not play with it to avoid the danger of suffocation.
Unpacking To avoid damaging the housing, please do not use pointed or sharp tools to open the box.
Please make sure that the content of the box is complete. If something is missing or you
notice any damage while unpacking, do not hook up the unit. Instead, contact your
authorized dealer.
Content of the box The box should contain the following:
• 1 preamp 100
• 1 power cord
• 2 input adapter plugs XLR – RCA for each equipped module
• 1 tone arm cable 5pin – XLR for each equipped module
• 1 measurement record
• 1 remote control
• 1 owner's manual
Packaging We recommend keeping the original packing in case the unit needs to be shipped in the
future.
Setting up Too low or too high temperatures may cause damage inside of the preamp. Therefore
we recommend you leave the unit to adapt to room temperature, before using it for
the first time.
Carefully remove the unit from its packaging and set it up in an appropriate location. To
protect the Phono preamp 100 from overheating make sure that the location offers sufficient
air circulation around the unit. Also, avoid excessive exposure to sun, dust and humidity.
Please make sure that your desired location for the Phono preamp is stable enough to carry
its weight.
Ventilation ducts and openings in the housing serve to keep the unit cool. They must not be
covered up with magazines, tablecloth, curtains etc.
If the Phono preamp has to be operated in an extremely warm environment it may be
necessary to supply additional ventilation. Avoid operating the unit in an excessively
humid environment like bathrooms etc.

UNPACKING AND SETTING UP

2