Table of Contents
Advertisement
Unpacking and Setting Up the Device
Heavy device
The device is very heavy and may cause injury if it falls .
►
The device should only be unpacked and set up by individuals who are
experienced in handling heavy loads .
►
Allow a second person to help you during unpacking and set-up if need be .
►
Pay attention to any possible sharp edges .
Unpacking
►
Please make sure that the items supplied are all present and complete .
Should parts be missing or should you detect damage while unpacking the device,
please do not connect it . Instead, contact your authorized specialist dealer .
Supplied items
The items supplied include:
• 1 package with the 101 integrated amplifier
• 1 power cord
• 4 jack to RCA input adapters, mono
• 1 067 remote control
• 1 set of operating instructions
• 1 set of warranty documents
Packaging
We recommend saving the original packaging for transportation,
such as relocation, etc .
Set-up
An operating temperature that is too low or too high may lead to errors in the device .
For this reason, after unpacking the device, leave it standing for some time before
connecting it and turning it on .
Carefully remove the device from the transportation packaging and place it in a
suitable location . When selecting a location for set-up, ensure sufficient ventilation and
avoid direct sunlight, dust, and humidity to protect the device from overheating .
Make sure that the set-up location is stable enough to support the weight of the device .
Slots and openings on the device serve as a means of ventilation . They must not be
covered by magazines, tablecloths, curtains, etc .
When operating the device in extremely warm environments, additional ventilation
must also be ensured . Avoid operating the device in extremely humid environments,
for example in a bathroom .
The IR receiver receives the signals from the remote control and should not be covered
by objects .
101 Integrated Amplifier
unPAckIng AnD settIng uP the DevIce
CAUTION
9
Advertisement
Table of Contents
