Table of Contents
Advertisement
O P E R A T I O N
M A N U A L
INPUT SENSITIVIT Y
Through factory settings all inputs are set to the same input sensitivity. As expe-
rience has shown, connected reproducers deliver different output levels. Therefore,
it is possible to decrease every input of the preamp
increase it up to
dB (factor
12
sources.
Adjustment options are available in the GLOBAL SETUP in submenu INPUT LEVEL.
For specific instructions please refer to THE SETUP MENUS/ GLOBAL SETUP.
MONITOR LOCK
Through factory settings the OUTPUT REC (22) of the preamp
connected to an analogue tape recorder. The INPUT
recording, because of the audio feedback that would result of this connection.
If your analogue recording device is connected to another input, it is possible to
activate the monitor lock for this input and lift the locking for INPUT
Adjustment options are available in the RECORD SETUP in submenu LOCK.
For specific instructions please refer to THE SETUP MENU/ RECORD SETUP.
This option cannot be chosen if the volume control for the RECORD level is variable.
VOLUME BALANCE
Some spatial arrangements require shifting the volume conditions for each
reproducing channel. The volume shift is realized by reducing one of the two stereo
channels. It is possible to reduce one channel of the preamp
(factor
2
.
8
) in steps of
1
dB, and for specific situations to switch off completely.
Adjustment options are available in the MAIN SETUP in submenu M-BAL. For the
RECORD level adjustment options are available in the RECORD SETUP in submenu
R-BAL. If the volume is fixed for the RECORD level, the balance setting has no
effect.
For specific instructions please refer to THE SETUP MENU/ MAIN SETUP and
RECORD SETUP respectively.
3 2 | 7 6
077
up to -
6
dB (factor
2
) in order to adjust the different volumes of your
4
077
is preset to be
3
= TAPE cannot be chosen for
3
.
077
up to
9
dB
) or to
INPUT NAMES
Through factory settings all inputs of the preamp
names. You may, however label the inputs
1
through
a range of names. It is of course possible to choose an individual name, e.g. the type
of your device.
Adjustment options are available in the GLOBAL SETUP in submenu INPUT
NAMES. For specific instructions please refer to THE SETUP MENU/ GLOBAL
SETUP.
Factory setting assigns the following names:
•
NPUT
1
CD
•
INPUT
2
TUNER
INPUT
TAPE
•
3
INPUT
AUX
•
4
1
•
INPUT
5
AUX
2
•
INPUT
6
AUX
3
MODUL
INPUT LINE (if equipped with LINE MODULE)
•
PH-MC (if equipped with PHONO MC MODULE)
PH-MM (if equipped with PHONO MM MODULE)
DA-RCA and DA-USB (if equipped with D/A-CONVERTER MODULE)
Restoring factory settings will reset all the input names to the ones above.
4 CHANNEL MODE
This option allows you to use both, the MAIN and RECORD level, as one
preamp. When activated only the MAIN level is operable. The RECORD level will
automatically reproduce the selected input of the MAIN level. Also the volume will
be adjusted for both levels. However you have the option to fade the volume of the
RECORD level in reverence to the MAIN level.
Channel Mode the activation option is available in the GLOBAL SETUP
For the
4
in submenu 4CH-MODE.
For specific instructions please refer to THE SETUP MENUS / GLOBAL SETUP.
For the FADER option please refer to THE SETUP MENUS / MAIN SETUP
0 7 7
P R E A M P L I F I E R
077
are assigned with specific
6
with other names. We provide
3 3 | 7 6
Advertisement
Table of Contents
