Unpacking And Setting Up - Burmester 077 Owner's Manual

CAUTION: The preamplifier 077 and the external power supply unit (if existent) are very heavy. To avoid
injuries while unpacking it is suggested that only personnel with experiences in heavy weights unpack the
units.
CAUTION: The preamp 077 is shipped inside a plastic protective cover. Make sure that children do not play
with it to avoid the danger of suffocation.
Unpacking To avoid damaging the housing, please do not use pointed or sharp tools to open the box.
Please make sure that the content of the box is complete. If something is missing or you
notice any damage while unpacking, do not hook up the unit. Instead, contact your
authorized dealer.
Content of boxes The two boxes should contain the following:
• 1 box with the preamp 077
• 1 Base plate with 4 carbon fiber damping discs for the preamp
• 1 AC BURMESTER power cord 2.5mm²
• 4 Input adapter plugs XLR – RCA
• 1 remote control 005
• 1 owner's manual
• 1 box with the power supply unit (only with external power supply)
• 1 Base plate with 4 carbon fiber damping discs for the power supply unit (only with
• 1 multi-pin power cord for connecting the power supply unit to the preamp (only with
Packaging We recommend to keep the original packing in case the unit needs to be shipped in the
future.
Setting up Too low or too high temperatures may cause damage inside of the preamp. Therefore
we recommend you leave the unit to adapt to room temperature, before using it for
the first time.
Carefully remove the unit from its packaging and set it up in an appropriate location. To
protect the preamp 077 from overheating make sure that the location offers sufficient air
circulation around the unit. Also, avoid excessive exposure to sun, dust and humidity.
Please make sure that your desired location for the preamp is stable enough to carry its
weight.
Ventilation ducts and openings in the housing serve to keep the unit cool. They must not be
covered up with magazines, tablecloth, curtains etc.
If the preamp has to be operated in an extremely warm environment it may be
necessary to supply additional ventilation. Avoid operating the unit in an excessively
humid environment like bathrooms etc.
Set up variations The feet of the preamp and of the power supply unit are constructed as spikes. They can
either be placed directly on the aluminum of the base plate or on the supplied carbon fiber
damping discs. Using the Kevlar fiber damping discs additionally decouples the entire
housing acoustically from the ground surface.

UNPACKING AND SETTING UP

external power supply)
external power supply)
2