Table of Contents
Advertisement
O P E R A T I O N
M A N U A L
BALANCE
NOTICE:
If the RECORD level is operated with fixed volume (FIX),
the balance selection has no effect.
Some spatial arrangements require a shift of the volume ratio between the two
reproducing channels. The volume shift is realized by reducing one of the two
stereo channels. It is possible to alleviate one channel of the preamp
(factor
2
.
8
) in steps of
1
dB, and for specific situations to switch it off completely.
Select menu item R-BAL with the left rotary switch or the navigation
buttons ► ◄ on your remote control.
With the right rotary switch or the navigation buttons ▲ ▼ on your remote
control you may select the desired value:
both stereo channels of the RECORD level will be reproduced
<C>
at the same volume level
the right channel of the RECORD level will be reproduced with
-09R to -01R
reduced volume
OFF R
the right channel of the RECORD level is muted
the left channel of the RECORD level will be reproduced with
-09L to -01L
reduced volume
OFF L
the left channel of the RECORD level is muted
INITIAL VOLUME
NOTICE:
The setting is only valid if menu item REC is set to VARIABLE.
This menu item preselects the volume for the RECORD level of your device
when it is switched on.
Select menu item R-VOL with the left rotary switch or the navigation
buttons ► ◄ on your remote control.
With the right rotary switch or the navigation buttons ▲ ▼ on your remote
control you may select the desired value:
5 0 | 7 6
077
up to
9
dB
The range of selection reaches from 01 to 20 and -79 dB to -60 dB respectively in
single steps.
If the setting LAST is chosen, the volume that was last selected will be used.
For security reasons, this is only possible up to a maximum volume of 20 and
-60 dB respectively.
VOLUME SCALE
NOTICE:
The setting is only valid if menu item REC is set to VARIABLE.
This menu item preselects whether the volume of the RECORD level is indicated
in BURMESTER steps or dB steps.
Select menu item R-SCALE with the left rotary switch or the navigation
buttons ► ◄ on your remote control.
With the right rotary switch or the navigation buttons ▲ ▼ on your remote
control you may select one of the following:
BUR
Volume indicated in BURMESTER steps (00 to 60)
dB
Volume indicated in dB steps (-99dB to +5dB or +21dB at high
amplification)
VOLUME CONTROL
This menu item preselects whether the RECORD level works with a fixed volume
for recordings or as a second preamp including volume regulation.
Select menu item REC with the left rotary switch or the navigation
buttons ► ◄ on your remote control.
With the right rotary switch or the navigation buttons ▲ ▼ on your remote
control you may select one of the following:
FIX
RECORD level has a fixed volume output for recording
VARIABLE RECORD level has adjustable volume output like a second preamp
TAPE MONITOR LOCK
NOTICE:
This setting is only valid when menu item REC is set on FIX.
0 7 7
P R E A M P L I F I E R
5 1 | 7 6
Advertisement
Table of Contents
