Setting The Ntsc Setup Pedestal On Line 21 Of The Broadcast Analog Video Output; Setting Up The Monitor Analog Output Parameters - evertz 7700 Manual

6.9.8. Setting the NTSC Setup Pedestal on Line 21 of the Broadcast Analog Video Output

Broadcast Analog
Output
Line 21 Setup
Pedestal
Auto
Off

6.10. SETTING UP THE MONITOR ANALOG OUTPUT PARAMETERS

The Monitor Analog Output menus are used to configure parameters associated with the monitor analog
output. The chart below shows the items available in the Broadcast Analog Output menu. Sections 6.9.1
to 6.9.7 give detailed information about each of the parameters.
Mon Status Window
Mon NTSC Setup
Pedestal
Mon Captions
This control determines how the NTSC Setup Pedestal will be applied on
line 21 of the Broadcast Analog video output. The NTSC setup pedestal
should not be present when there is an EIA-608 closed caption signal on
line 21.
When the control is set to Auto the Setup pedestal will be added to line 21
when captions are not being encoded. (The Captions item on the VANC
Data Processing menu is set to Off). If captions are being encoded, NTSC
setup will not be added to line 21.
When the control is set to Off the NTSC Setup pedestal will not be added to
line 21.
Determines whether the module status display will be on or off.
Sets whether the NTSC setup pedestal will be on the Monitor Analog output.
Sets whether captions will decoded and displayed on the Monitor Analog
Output. (7711HDC-SN-EAES4 version only)
Revision 1.1
7711HDC HD Broadcast Quality Down Converter
7700 MultiFrame Manual
7711HDC - 31