Setting The Hue; Setting The Saturation; Setting The Contrast; Setting The Brightness - evertz 7700 Manual

7700 MultiFrame Manual
7711HDC HD Broadcast Quality Down Converter

6.9.3. Setting the Hue

Broadcast Analog
Output
Hue
-17.5 to 17.5
0.0

6.9.4. Setting the Saturation

Broadcast Analog
Output
Saturation
-10 to 10
0

6.9.5. Setting the Contrast

Broadcast Analog
Output
Contrast
0 to 20
0

6.9.6. Setting the Brightness

Broadcast Analog
Output
Brightness
-7.5 to 15.0
0.0

6.9.7. Setting the NTSC Setup Pedestal on the Broadcast Analog Video Output

Broadcast Analog
Output
NTSC Setup
Pedestal
Off
On
7711HDC - 30
This control allows the user to adjust the Hue of the analog video in
increments of 0.5 degrees.
This control allows the user to adjust the saturation level of the analog video
in increments of 1%.
This control allows the user to adjust the contrast of the analog video in
increments of 1%.
This control allows the user to adjust the brightness of the analog video in
increments of 0.1 IRE.
This control determines how the NTSC Setup Pedestal will be applied on
the Broadcast Analog video output. The NTSC setup pedestal should not be
present when operating in Japan.
Set the control to On to apply the Setup pedestal to the active picture
starting.
Set the control to Off to remove the Setup pedestal from the active picture.
Revision 1.1