Jumpers; Selecting Whether Local Faults Will Be Monitored By The Global Frame Status; Figure 7-1: Location Of Jumpers - Main Module; Figure 7-2: Location Of Jumpers - Sub Module - evertz 7700 Manual

7.

JUMPERS

EVERTZ (C) 7700PB3
MODULE STATUS
SIGNAL PRESENT
GENLOCK
Run
Upgrade
J16
FRAME
STATUS
ON
OFF
J22
DONE
LOCK32
7.1. SELECTING WHETHER LOCAL FAULTS WILL BE MONITORED
BY THE GLOBAL FRAME STATUS
FRAME STATUS: The FRAME STATUS jumper J22 located at the front of the main module
determines whether local faults (as shown by the Local Fault indicator) will be
connected to the 7700FR frame's global status bus.
To monitor faults on this module with the frame status indicators (on the PS FRAME
STATUS LED's and on the Frame's Fault Tally output) install this jumper in the On
position. (Default)
When this jumper is installed in the Off position, local faults on this module will not
be monitored.
J8
SFF POWER GND +12V
Figure 7-1: Location of Jumpers – Main Module
EVERTZ
(A) APB3FMTCON
Figure 7-2: Location of Jumpers – Sub Module
Revision 1.1
7711HDC HD Broadcast Quality Down Converter
J80
+5V +12V
7700 MultiFrame Manual
HI-Z 75R
J9
+12V
SFF POWER
7711HDC - 35