Table of Contents
Advertisement
23. If installed, close the cable management arm.
24. Power up the server.
The installation is complete.
Optical drive option
The server supports a slim-type SATA optical drive.
Installing the optical disc drive in the LFF universal media bay
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
•
The components included with the hardware option kit
•
T-10 Torx screwdriver
•
Phillips No. 1 screwdriver
Procedure
Installing the optical drive in the universal media bay
1.
Remove the optical drive blank from the universal media bay.
Retain the blank for future use.
Hardware options installation
94
Advertisement
Table of Contents
