Installing the boot device
4.
Power down the server.
5.
If installed, open the cable management arm.
6.
Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
7.
Disconnect all peripheral cables from the server.
8.
Remove the server from the rack.
9.
Remove the access panel.
10. Do one of the following:
Remove the air baffle.
•
Remove the midplane drive cage.
•
11. Remove the screws and spools from the NS204i Boot Device.
12. Remove the first secondary riser slot blank.
Hardware options installation
179