Table of Contents
Advertisement
Allow the alcohol to evaporate before continuing.
13. Remove the thermal interface protective cover from the new heatsink.
14. Install the midplane cage heatsink:
CAUTION: To prevent mechanical damage or depositing oil on your hands or other contaminant to the
heatsink contact surface, hold the heatsink only by the edge of its base plate. Do not touch the heatsink
fins.
CAUTION: To prevent thermal failure or component damage, do not move the heatsink once the bottom of its
base plate touches the top of the processor. Excessive heatsink movement can cause the thermal grease to
smear and become uneven. Voids in the compound can adversely impact the transfer of heat away from the
processor.
Hardware options installation
145
Advertisement
Table of Contents
