Table of Contents
Advertisement
5.
Install the optical drive tray:
a. Install the optical drive bay on the universal media bay (callout 1).
b. Install the optical drive bay screws (callout 2).
Installing the universal media bay in the server
6.
Power down the server.
7.
If installed, open the cable management arm.
8.
Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
9.
Disconnect all peripheral cables from the server.
10. Remove the server from the rack.
11. Remove the access panel.
12. Do one of the following:
Remove the air baffle.
•
Remove the midplane drive cage.
•
13. Remove the fan cage.
14. Remove the midwall bracket.
15. Install the universal media bay.
16. Install the midwall bracket.
17. Install the fan cage.
18. Do one of the following:
Install the air baffle.
•
Installing the midplane drive cage.
•
Hardware options installation
139
Advertisement
Table of Contents
